The Tooth Pocket Door Knobbies are the second set in the 5x7 Dollar Days Six  Series and the 6x10 Dollar Days Six series.  Thank you to everyone who preordered these series! 

 The Tooth Pocket Door Knobbies were designed for the 5x7 and 6x10 hoop.

Each one is made entirely in one hooping with no hand sewing required.

Make life easy on the tooth fairy with this handy Tooth Pocket Door Knobbie! No more fumbling for a lost tooth in the dark!  Your little come can simply place their tooth in the Tooth Pocket and hang the knobbie on their bedroom doorknob.  The toothfairy can easily retrieve the tooth and leave a little surprise in its place.

Complete instructions can be found at the bottom of this page.

 $12.00



To purchase the Tooth Pocket Door Knobbie, please click on the add to cart button.

Tooth Pocket Door Knobbie (includes pes, jef & hus formats):

 
 

Tooth Pocket  Door Knobbie Instructions:

 

1. Hoop one or two layers of very heavy weight water soluble stabilizer such as Badgemaster or Ultra Solvy or tearaway stabilizer.

Place a 6x8" piece of fabric centered on hoop for 5x7 design.

(Substitute 7 x 10" piece of fabric for 6x10 design.)

Stitch first color to secure and to stitch pocket placement line.

2.  Cut a 6x7" piece of fabric and fold in half and press so it is 6x3.5" for 5x7 design.

(Substitute a 7x9" piece of fabric and fold in half and press so it is 7x4.5" for 6x10 design.)

 Place folded fabric on top of design so folded edge is even with horizontal pocket placement line and lower portion of design is completely covered.

 IMPORTANT:  Securely tape entire folded edge of pocket down so presser foot does not become entangled in future steps.

Stitch second color to secure.

Stitch third color (wording).

Stitch fourth color (tooth).

Stitch fifth color (cheeks).

Stitch sixth color (eyes smile).

3.    Float second piece of fabric BENEATH hooped design, covering design completely on back.  Fabric should be face down.

Stitch seventh color to secure.

5.  Stitch eighth color (hole outline).

Remove hoop from machine, but do NOT remove project from hoop.

CAREFULLY cut away fabric from inside hole outline as closely to stitching as possible being careful not to cut stitching or stabilizer.

Flip hoop upside down, and closely cut bottom fabric carefully away inside hole outline, being careful not to cut stitching or stabilizer.

 Replace hoop on machine.

Stitch ninth color to reinfore.

Trim any fuzzies away from hole outline.

Stitch tenth color (hole satin stitching).

6.  Carefully trim fabric and pocket fabric layers closely to door knobbie outline being careful not to cut stitching or stabilizer.

Carefully trim bottom fabric layer under hoop closely to door knobbie outline being careful not to cut stitching or stabilizer.

Stitch 11th color to reinfore.

Trim any fuzzies around perimeter of outline.

Stitch final color (door knobbie perimeter satin stitching).

Remove from hoop.

Remove excess stabilizer.

You're finished!