This is the first of four sets of THE CASTLE finger puppets series! 

  We won't give away all of the fun, but future sets will include a prince, a dragon, a unicorn, and a frog prince as well as other fun finger puppets!

Set One includes both levels of the Castle Pocket Hanger and the Princess Finger Puppet!

The Castle Pocket Hanger is designed for the 5x7 hoop.

The Princess Finger Puppet is designed for the 4x4 hoop.

  THE CASTLE SET ONE ONLY:

This set includes the Castle top level pocket hanger, Castle bottom level pocket hanger and the princess finger puppet ONLY.

$15.00

Castle Set One Pes:Make payments with PayPal - it's fast, free and secure!

Castle Set One Jef:Make payments with PayPal - it's fast, free and secure!

Castle Set One Hus:  Make payments with PayPal - it's fast, free and secure!

Make payments with PayPal - it's fast, free and secure!

Castle Pocket Hanger Instructions:

1. Top Level:  Hoop one layer of cutaway stabilizer and pin or float one half sheet of felt to the top of it.  Stitch out colors 1 and 2.  Place a second piece of felt cover the bottom of the castle up to the horizontal stitching line that was stitched last.  MAKING SURE the presser foot does not slip underneath the top piece of felt, stitch the next color to secure the top layer in place.  Stitch the final satin stitch.  Unhoop and trim around the perimeter of the design.

2.  Bottom Level:  Hoop one layer of cutaway stabilizer and pin or float one half sheet of felt to the top of it.  Stitch out colors 1 and 2.  Place a second piece of felt cover the bottom of the castle up to the horizontal stitching line that was stitched last.  MAKING SURE the presser foot does not slip underneath the top piece of felt, stitch the next color to secure the top layer in place.  Stitch the final satin stitch.  Unhoop and trim around the perimeter of the design.  Carefully open the buttonholes with a seam ripper or small sharp scissors.  Make additional bottom layers as desired.

3.  Stitch 1/2" buttons to the bottom corners of each layer of the castle EXCEPT the bottom layer.

4.  Button the layers together.

5.  Hand stitch a piece of ribbon from one tower to the other tower on the top Castle piece to hang.  You can also add bows or decorative buttons where the ribbon is attached if desired.

6. Place puppets in pockets and hang!