The Snowman Tic Tac Toe Wristlet Set is the second set in the Tic Tac Toe Series!
Thank you to everyone who preordered this series!
You will be amazed at how quickly the Snowman Tic Tac Toe Wristlet stitches up! This fun set is designed for the 4x4 hoop.
This set is made entirely in the hoop with no hand stitching required!
The Snowman Tic Tac Toe Wristlet game board is made entirely in one hooping.
It is made from novelty cotton prints and is suitable for both boys and girls. A ribbon wrist strap is added in the hoop. The back overlaps creating a little built in envelope for storing game pieces. The Snowman Tic Tac Toe Wristlet game board requires only 9 minutes stitching time!
The Tic Tac Toe Game pieces are all made entirely in one hooping! You will make 6 mittens of one color and 6 mittens of another color with just four color stops and just 10 minutes stitching time! The Game pieces are made from inexpensive felt.
$12.00
Complete instructions can be found below.
To purchase the Snowman Tic Tac Toe Wristlet Set for the 4x4 hoop, please click on the add to cart button (includes pes, jef and hus formats):
Stitch sixth color (nose).
Stitch seventh color (mouth).
Stitch eighth color (tic tac toe outline).
2. Stitch ninth color (ribbon strap placement line).
Cut a 10 1/2" piece of 3/8 - 7/8" ribbon.
Fold in half to form a loop. Place loop centered over ribbon strap placement line so cut ends extend approximately 1/2" above game outline and remainder of loop is inside game outline.
IMPORTANT: Tape ribbon loop in place inside design area so presser foot does not become entangled in ribbon in future steps.
Stitch tenth color to secure.
Cut 2 3.5x7" pieces of fabric and fold in half and press so they are 3.5x3.5".
Overlap folded edges of fabric pieces approximately 3/4". Placed overlapped pices of fabric on top of design with overlapped edges slightly above the middle of design.
Tape top folded edge down securely so presser foot does not become entangled in pocket in future steps!
Stitch 11th color to secure.
Remove from hoop. Trim around perimeter of design leaving approximately 1/4-1/2" seam allowance, clipping curves well.
Turn right side out.
Insert playing pieces inside.
You're finished!