Sneaker Savers are an incredibly quick and easy project for the 5x7 hoop!  Each Sneaker Saver is made completely in one hooping and one requires ONE minute stitching time!  Sneaker Savers only require one small seam to be sewn shut upon completion.  Sneaker Savers can be filled with cedar shavings, baking soda or potpourri.  They are then inserted into your sneakers (or other shoes) to keep them smelling fresh!

Sneaker Savers are VERY economical to make!  I was able to fill both sneaker savers with less than a small 1 lb box of baking soda.

Sneaker Savers can also be used with boots or other shoes! 

$8.00

Complete instructions can be found below.

To purchase the 5x7 Sneaker Savers, please click on the add to cart button.

5x7 Sneaker Savers (includes pes, jef &  hus formats):

 Sneaker Saver Instructions:

1. Hoop one layer of cutaway or tearaway stabilizer.

Stitch first color (fabric placement outline).

Cover outline completely with a piece of fabric.

Stitch second color to secure.

2.  Place a second piece of fabric on top of design, face down, covering design completely.

Stitch third color to secure.

Remove from hoop.

Trim around perimeter of design leaving approximately 1/4 - 1/2" seam allowance, clipping curves well.

Turn right side out.

Stuffed as desired with baking soda, cedar chips or potpourri.

Sew small seam closed by hand or machine.

You're finished!