The Puppy Mega Pack is the third set in the Mega Pack Series.  Thank you to everyone who preordered this series. 

PLEASE NOTE:  Mega Packs are NOT included in $5 Friday or any other sale.  They are a combination of several sets and do not qualify for sale pricing.  Mega pack designs are only available as a complete Pack and are not sold separately.  Thank you for your understanding.

 

The Puppy Mega Pack Set includes a wide variety of designs sporting our sweet little puppy!

The Puppy Mega Pack Set includes:

Puppy 5x7 Chalk Mat 

Puppy 1 1/2" Button Cover

Puppy Book Buddy

Puppy 5x7 Applique

Puppy 5x7 Finger Puppet

Regularly $25.00

3 Day Intro Price $18.00

Complete Instructions can be found at the bottom of this page.

To purchase the Puppy Mega Pack, please click on the add to cart button (includes pes, jef & hus formats):

 

Puppy Button Cover

This button cover is made entirely in one hooping with a stitched guideline to make them easy to use with Fabric Covered Button Kits.  I used the Dritz Covered Button Kits.  This button cover will fit 1 1/2" buttons.

Puppy Button Cover

1. Hoop one layer of tearaway stabilizer.

Stitch first color (fabric placement outline).

Cover outline completely with a piece of fabric.

Stitch second color to secure.

2.  Stitch third color (puppy head).

Stitch fourth color (eyes mouth).

Stitch fifth color (nose).

Remove from hoop.  Trim around perimeter of circle stitching right next to stitching.  Remove excess tearaway stabilizer inside design.

Assemble button according to button kit instructions. 

Monkey Finger Puppet:

1. Hoop 1 layer of cutaway stabilizer.

Center a 5x5" piece of felt on top of hooped stabilizer.

Stitch first color to secure.

2. Stitch second color (puppy).

Stitch third color (legs).

Stitch fourth color (eyes, smile).

Stitch fifth color (nose).

3.  Float a second 5x5" piece of felt under hooped design, covering desgn completely.

Stitch sixth color to secure.

Remove from hoop. Trim around perimeter of finger puppet design.

You're finished!

 Puppy Book Buddy Instructions

1. Hoop one or two layers of heavy duty WSS stabilizer (I prefer Badgemaster for the best results!).

Stitch the first color (book buddy fabric placement outline and ribbon placement outline).  Do NOT place fabric on outline yet.

Place a 12" piece of 5/8 - 7/8" ribbon centered over ribbon placement outline with approximately 1/2" of ribbon extending over top of ribbon outline in design area.

2.  Stitch second color to secure ribbon.

IMPORTANT:  Tape ribbon down so it does not become entangled in presser foot in future steps.

3.  Place a piece of fabric on top of book buddy fabric placement outline covering completely.  Stitch third color to secure.

4.  Stitch the fourth color (puppy head).
Stitch fifth color (eyes, smile).

Stitch sixth color (nose).

5.  Place a second piece of fabric UNDER hoop stabilizer, RIGHT SIDE facing DOWN.  Stitch 7th color (book buddy outline) to secure.

6.  Remove hoop from machine, but do NOT remove fabric stabilizer from hoop!

Carefully trim fabric top AND bottom closely around perimeter of book buddy design being careful not to cut stabilizer or ribbon.  Replace hoop in machine.

Stitch 8th color to reinforce.  Trim away any fuzzies.

7.   Stitch 9th color (book buddy satin stitching).

8.  Remove from hoop and carefully trim wss away from design.  Remove tape from ribbon.

You're finished!

5x7 Puppy Chalk Mat

1. Hoop one layer of stabilizer.

Place a 7x9" piece of fabric on top of stabilizer, centered.

Stitch first color to secure.

2. Stitch second color (puppy head).

Stitch third color (eyes, smile).

Stitch fourth color (nose).

3.  Stitch fifth color (chalk fabric placement outline).

Cover outline completely with a piece of chalk fabric.

Stitch sixth color to secure.

Trim chalk fabric as closely to outline stitching as possible being careful not to cut stitching or fabric underneath.

Stitch seventh color (chalk fabric satin stitching).


4.  Stitch eighth color (ribbon tie placement outline).

Cut a 24" piece of narrow ribbon and fold in half.

Place folded ribbon centered over placement outline with approximately 1/2" of ribbon loop extending outside design and rest of ribbon within design area.

Stitch 9th color to secure.


5.  Cut a 6x6" piece of fabric and fold in half and press so it is 3x6".

Place folded fabric over left hand side of design with folded edge even with left hand side of chalk fabric so folded edge is lying vertically across design and entire design LEFT of the chalkboard is completely covered.

Stitch 10th color to secure.

7.  Place a second 7x9" piece of fabric on top of design, FACE DOWN, covering design completely.

Stitch 11th color to secure.

Remove from hoop.

Trim around perimeter of design leaving approximately 1/4-1/2" seam allowance.

Turn right side out.

Flip pocket to back to enclose seam.

Place piece of chalk inside pocket.

Roll up and tie with ribbon.

You're finished!

HELPFUL HINT:  If you will press the chalk mat with a hot iron BEFORE turning right side out, the chalk fabric will be slightly more flexible and easier to turn.  AFTER turning, you can again press the mat WITH A PRESSING CLOTH to remove any white marks. :)

NOTE:  Do not iron chalk fabric directly without a pressing mat. It is vinyl and will melt! :)

5x7 Puppy Applique Instructions:

1. Hoop item to be appliqued as desired.

2. Stitch first color (puppy fabric placement outline).

Cover outline completely with a piece of fabric.

Stitch second color to secure.

Trim fabric as closely to outline as possible being careful not to cut stitching or fabric underneath.

Stitch third color (puppy satin stitching).

Stitch fourth color (eyes, smile).

Stitch fifth color (nose).

Stitch fifth color to secure.

You're finished!