The Let It Snow! Stocking is the first set in the In The Hoop Stocking Series.

Thank you to everyone who preordered this series!

The Let it Snow! Stocking is made entirely in one 5x7 hooping with no hand sewing required!  

$10.00

Complete instructions can be found at the bottom of this page.

To purchase the Let It Snow! Stocking for the 5x7 hoop, please click on the add to cart button.

Let It Snow! Stocking (includes pes, jef & hus formats):

 

Let it Snow! Stocking Instructions:

1.  Hoop one layer of tearaway or cutaway stabilizer (I like to use cutaway for a little added body to the final product).

Stitch the first color (stocking fabric placement outline).

2.  Fold a 6x16" piece of fabric in half so it is 6x8" and press well.  Place the folded fabric on top of the hooped stabilizer completely covering the stocking fabric placement outline with the folded edge even with the top line of the stitching.

IMPORTANT: Place a piece of clear tape along the folded edge so it does not become entangled in the presser foot in future steps!

Stitch the second color to secure.

3.    Stitch the third color (rick rack border at top of stocking.).

 Stitch fourth color (wording).

Stitch fifth color (stick arms).

Stitch sixth color (snowman fabric placement outline).

Cover outline completely with a piece of fabric.

Stitch seventh color to secure.

Trim fabric as closely to outline as possible being careful not to cut stitching or fabric underneath.

Stitch eighth color (snowman satin stitching).

Stitch ninth color (cheeks).

Stitch tenth color (eyes, mouth).

Stitch 11th color (nose).

4.  Fold a 6x16" piece of fabric in half so it is 6x8" and press well.  Place the folded fabric on top of the hooped stabilizer/fabric with the folded edge even with the other folded edges.

IMPORTANT: Place a piece of clear tape along the folded edge so it does not become entangled in the presser foot in future steps!

Stitch the final color to finish.

5.  Remove stocking from hoop and trim leaving 1/4" seam allowances and clip curvers.  Trim stabilizer away from stocking opening.

Turn right side out.

You're finished!