The Jack O'Lantern Cones Set is the fifth set in the In The Hoop Mania! Series.

Thank you to everyone who preordered this series.

In The Hoop Jack O'Lantern cones were designed in three hoop sizes: 6x10, 5x7 and 4x4!

Each Jack O'Lantern cone is made in one hooping from inexpensive cotton prints.

They require one line of stitching to be sewn by hand upon completion.


Jack O'Lantern cones have a ribbon hanger which enables them to be hung from a doorknob, or back of a chair!  They make a great You've Been Boo'd! suprise!

They can be filled with candies or little gifts for Halloween favors.



The Jack O'Lantern Cone Set includes:
Jack O'Lantern Cone for the 6x10 hoop

Jack O'Lantern Cone for the 5x7 hoop

Jack O'Lantern Cone for the 4x4 hoop

$15.00

Complete instructions can be found at the bottom of this page.

To purchase the Jack O'Lantern Cones, please click on the paypal button.

Jack O'Lantern Cones (includes pes, jef & hus formats):

 
 
Jack O'Lantern Cone Instructions:

1. Hoop one layer of cutaway stabilizer.

Stitch first color (cone fabric placement outline).

Place a piece of fabric on top of fabric outline, covering completely.

2. Stitch second color to secure.

3.  Stitch third color (facial features).


4.  Stitch fourth color (ribbon handle placement lines).

5.  Place one end of a 10" piece of ribbon on the first ribbon outline so 1/2" extends past design and remainder is within design area.

Tape down to secure.

Stitch 5th color to secure.

6.  Place other end of ribbon piece on second ribbon outline so 1/2" extends past design and remainder is within design area.

Tape ribbon loop down secure WITHIN DESIRE.  Be careful that entire loop is taped down so presser foot cannot become entangled in future steps.

Stitch 6th color to secure.

7.  Place a second piece of fabric on top of design FACE DOWN, covering entire design completely.

Stitch final color to secure.

8.  Remove from hoop.  Trim around perimeter of design leaving approximately 1/4-1/2" seam allowance.

Clip corners and curves well.

Turn right side out and press.

Fold both sides of baby to back so they meet to form a cone (jack o'lantern face will be on OUTSIDE of cone).

Whip sides together by hand.

You're finished!