The Ghost Tic Tac Toe Wristlet Set is the first set in the Tic Tac Toe Series!

Thank you to everyone who preordered this series!

You will be amazed at how quickly the Ghost Tic Tac Toe Wristlet stitches up!  This fun set is designed for the 4x4 hoop.

This set is made entirely in the hoop with no hand stitching required!

The Ghost Tic Tac Toe Wristlet game board is made entirely in one hooping. 

It is made from novelty cotton prints and is suitable for both boys and girls.  A ribbon wrist strap is added in the hoop.  The back overlaps creating a little built in envelope for storing game pieces.  The Ghost Tic Tac Toe Wristlet game board requires only 10 minutes stitching time!

The Tic Tac Toe Game pieces are all made entirely in one hooping!  You will make 6 brown bats and 6 black bats with just four color stops and just 13 minutes stitching time!  The Game pieces are made from inexpensive felt. 

$12.00

Complete instructions can be found below.

To purchase the Ghost Tic Tac Toe Wristlet Set for the 4x4 hoop, please click on the add to cart button (includes pes, jef and hus formats): 

 Game Pieces Instructions:

1. Hoop one layer of stabilizer.

Center a 6x6" piece of felt over stabilizer.

Stitch first color (playing pieces outline).

Stitch second color (first set of bats).

Stitch third color (second set of bats).

Float a second 6x6" piece of felt beneath hooped design.

Stitch fourth color to secure.

2.  Remove from hoop.

Trim around perimeter of each game playing piece.

You're finished!

Ghost Tic Tac Toe Wristlet Game Board

1. Hoop one layer of stabilizer.

Center a 6x6" piece of fabric over stabilizer.

Stitch first color to secure.

Stitch second color (ghost fabric placement outline).

Place a piece of fabric on top of ghost outline, covering completely.

Stitch third color to secure.

Trim ghost fabric as closely to outline as possible being careful not to cut stitching or fabric underneath.

Stitch fourth color (ghost satin stitching).

Stitch fifth color (tic tac toe outline).

2. Stitch sixth color (ribbon strap placement line).

Cut a 10 1/2" piece of 3/8 - 7/8" ribbon.

Fold in half to form a loop.  Place loop centered over ribbon strap placement line so cut ends extend approximately 1/2" above game outline and remainder of loop is inside game outline.

IMPORTANT:  Tape ribbon loop in place inside design area so presser foot does not become entangled in ribbon in future steps.

Stitch seventh color to secure.

Cut 2 3.5x7" pieces of fabric and fold in half and press so they are 3.5x3.5".

Overlap folded edges of fabric pieces approximately 3/4".  Placed overlapped pices of fabric on top of design with overlapped edges slightly above the middle of design.

Stitch eighth color to secure.

 Remove from hoop.  Trim around perimeter of design leaving approximately 1/4-1/2" seam allowance, clipping curves well.

Turn right side out.

Insert playing pieces inside.

You're finished!