The 5x7 Flower TicTacToe Wristlet is the fifth set in the In The Hoop Games Series.  Thank you to everyone who preordered this series!

You will be amazed at how quickly the 5x7 Flower Tic Tac Toe Wristlet stitches up!  This fun set is designed for the 5x7 hoop.

This set is made entirely in the hoop with no hand stitching required!

The Flower Tic Tac Toe Wristlet game board is made entirely in one hooping. 

It is made from novelty cotton prints.  A ribbon wrist strap is added in the hoop.  The back overlaps creating a little built in envelope for storing game pieces.  The Flower Tic Tac Toe Wristlet game board requires only 10 minutes stitching time!

The Tic Tac Toe Game pieces are all made entirely in one hooping!  You will make 6 dark pink flowers and 6 light pink flowers with just four color stops!  The Game pieces are made from inexpensive felt. 

The Flower Wrist Tic Tac Toe Sets are very easy to make party favors!

12.00

Complete instructions can be found below.

To purchase the 5x7 Flower Tic Tac Toe Wristlet Set for the 5x7 hoop, please click on the add to cart button (includes pes, jef and hus formats): 

 

 Game Pieces Instructions:

1. Hoop one layer of stabilizer.

Center a 5x7" piece of felt over stabilizer.

Stitch first color (playing pieces outline).

Stitch second color (first set of flowers).

Stitch third color (second set of flowers).

Float a second 5x7" piece of felt beneath hooped design.

Stitch fourth color to secure.

2.  Remove from hoop.

Trim around perimeter of each game playing piece.

You're finished!

Flower Tic Tac Toe Wristlet Game Board

1. Hoop one layer of stabilizer.

Center a 6x8" piece of fabric over stabilizer.

Stitch first color to secure.

Stitch second color (tic tac toe outline).

2. Stitch third color (ribbon strap placement line).

Cut a 12" piece of 7/8" ribbon.

Fold in half to form a loop.  Place loop centered over ribbon strap placement line so cut ends extend approximately 1/2" above game outline and remainder of loop is inside game outline.

IMPORTANT:  Tape ribbon loop in place inside design area so presser foot does not become entangled in ribbon in future steps.

Stitch fourth color to secure.

Cut 2 6x10" pieces of fabric and fold in half and press so they are 6x5".

Overlap folded edges of fabric pieces approximately 3/4".  Placed overlapped pices of fabric on top of design with overlapped edges slightly above the middle of design.

SECURELY TAPE OVERLAPPED EDGES so presser foot does not become entangled in future steps.

Stitch fifth color to secure.

 Remove from hoop.  Trim around perimeter of design leaving approximately 1/4-1/2" seam allowance, clipping curves well.

Turn right side out.

Insert playing pieces inside.

You're finished!