Welcome To Eggville,
Home of the Good Egg Family!
No rotten eggs allowed!
DaddyEgg is one hard working egg!
He does an eggcellent job taking care of all of the animals at the Eggville Community Pet Shop!
$24.00
Eggville Community Series Set 3 -
Eggville Pet Shop
This set includes the following:
Eggville Pet Shop play mat (5x7hoop)
Mini Eggville PupHouse Purse (4x4 hoop)
Eggville Pet Carrier (5x7 hoop)
Egg Puppy (4x4 hoop)
Egg Kitty(4x4 hoop)
Egg Bunny (4x4 hoop)
Egg Mouse (4x4 hoop)
To purchase the Eggville Community Set 2 - Eggville Elementary, please click on the paypal button for the format of your choice:
Eggville PetShop pes:
Eggville PetShop jef:
Eggville PetShop hus:
Eggville Pets Instructions:
1. Hoop one layer of tearaway stabilizer. Stitch the first color (egg outline).
2. Place one small piece of scrap felt over outline stitching.
3. Stitch the second color to secure in place.
4. Stitch all remaining colors EXCEPT the final color!
5. Add a second piece of scrap felt on top of the stitched felt.
6. Stitch the final color to secure in place.
7. Trim around the egg outline stitching and carefully remove stabilizer.
8. Turn egg inside out, stuff and whip opening shut.
You're finished!
Eggville PetShop PlayMat
2 pieces 6x8" fabric
1 piece 6x8" thin batting
4 - 3x6" pieces of fabric, folded in half and pressed so they are 3x3"
1. Hoop one layer of tearaway or cutaway stabilizer.
2. Stitch the first color (fabric placement outline).
3. Place one 6x8"piece of thin batting on top of stabilizer being careful to completely cover outline.
Add one layer of 6x8" fabric on top of batting.
4. Stitch the second color to secure in place.
5. Stitch next three colors (petshop outline and sign stitching).
6. Stitch the sixth color (pocket fabric placement stitching).
Place folded piece of fabric over pocket fabric placement stitching so the folded edge is even with the top of the stitching on both sides.
Stitch the seventh color to secure in place.
Carefully trim pocket fabric as close to the pocket as possible without cutting stitching.
Stitch the eighth color (finishing satin stitching).
7. Stitch the ninth color (pocket fabric placement stitching).
Place folded piece of fabric over pocket fabric placement stitching so the folded edge is even with the top of the stitching on both sides.
Stitch the tenth color to secure in place.
Carefully trim pocket fabric as close to the pocket as possible without cutting stitching.
Stitch the eleventh color (finishing satin stitching).
8. Stitch the twelfth color (pocket fabric placement stitching).
Place folded piece of fabric over pocket fabric placement stitching so the folded edge is even with the top of the stitching on both sides.
Stitch the thirteenth color to secure in place.
Carefully trim pocket fabric as close to the pocket as possible without cutting stitching.
Stitch the fourteenth color (finishing satin stitching).
9. Stitch the fifteenth color (pocket fabric placement stitching).
Place folded piece of fabric over pocket fabric placement stitching so the folded edge is even with the top of the stitching on both sides.
Stitch the sixteenth color to secure in place.
Carefully trim pocket fabric as close to the pocket as possible without cutting stitching.
Stitch the seventeenth color (finishing satin stitching).
10. Place a 6x8" piece of fabric FACE DOWN on top of hooped stabilizer/fabric. Stitch the final color to secure in place.
11. Unhoop mat and trim around perimeter of stitching leaving approximately 1/4" seam allowance.
Turn right side out and whip opening shut.
12. Insert Egg Pets in the pockets!
Eggville PupHouse Mini Purse
Need 2 - 5x9" pieces of fabric folded and pressed in half to become 5x4.5"
1 30" piece of thin ribbon.
1. Hoop one layer of tearaway or cutaway stabilizer.
2. Stitch the first color (fabric placement outline).
3. Place one folded piece of fabric on top of fabric placement outline, so the folded edge is even with the top sides of the fabric placement outline.
4. Stitch the second color to secure in place.
5. Stitch next four colors (pup house stitching).
6. Place one end of 30" length of ribbon at top left hand side of design and tape in place so it extends approximately 1/2" outside of design. Repeat with other side of ribbon on the right hand side of design.
Place the second folded piece of fabric FACE DOWN on top of hooped stabilizer/fabric so the folded edg is even with the first folded edge. Stitch the final color to secure in place.
7. Unhoop purse and trim around perimeter of stitching leaving approximately 1/4" seam allowance.
Turn right side out.
12. Insert Egg Pet in the purse!
Egg Pet Carrier
1. Hoop one layer of wss stabilizer (I used Ultra Solvy).
2. Stitch the first color (fabric placement outline).
3. Place one 6x8" piece of fabric on top of wss. Stitch second color to secure in place.
4. Place one piece of 4x7" medium weight vinyl on top of outline so top edge of vinyl is even with the sides of the outline before they begin to curve up.
5. Stitch the third color (secures vinyl in place and makes pocket dividers).
6. Float a second piece of 6x8" fabric under hooped stabilizer with right side facing down.
7. Stitch the fourth color to secure in place. Carefully trim fabric on TOP AND BOTTOM of the wss as closely to stitching line as possible without cutting stitching or wss.
8. Stitch the fifth color (handle outline).
9. Using very sharp scissors carefully cut out fabric INSIDE handle outline both on top and underneath hooped wss as closely as possible without cutting stitching or WSS.
10. Stitch the sixth color to further secure in place. Trim any fuzzies.
11. Stitch the seventh color to finish handle satin stitching.
12. Stitch final color to finish edge of carrier with satin stitching.
Insert pets into pockets.
