The You've Been Boo'd Pocket Door Knobbies are the fourth set in the Fall Harvest Series.  Thank you to everyone who preordered this series!

The Pocket Door Knobbie was designed for the 5x7 hoop.

Each one is made entirely in one hooping with no hand sewing required.

Surprise your neighbhors by secretly hanging a You've Been Boo'd pocket filled with candy or other treats on their door knob!

 Complete instructions can be found at the bottom of this page.

$10.00

To purchase the You've Been Boo'd Pocket Door Knobbie, please click on the add to cart button.

You've Been Boo'd Pocket Door Knobbie (includes pes, jef & hus formats): 

You've Been Boo'd Pocket  Door Knobbie Instructions:

1. Hoop one layer of very heavy weight water soluble stabilizer such as Badgemaster or Ultra Solvy or one layer of tearaway stabilizer.

Place a 6x8" piece of fabric centered on hoop.

Stitch first color to secure and to stitch pocket placement line.

2.  Cut a 6x7" piece of fabric and fold in half and press so it is 6x3.5".

Place folded fabric on top of design so folded edge is even with horizontal pocket placement line and lower portion of design is completely covered.

 IMPORTANT:  Securely tape entire folded edge of pocket down so presser foot does not become entangled in future steps.

Stitch second color to secure.

Stitch third color (wording).

Stitch fourth color (ghost).

Stitch fifth color (ghost eyes, smile).

3.    Float second piece of fabric BENEATH hooped design, covering design completely on back.  Fabric should be face down.

Stitch sixth color to secure.

5.  Stitch seventh color (hole outline).

Remove hoop from machine, but do NOT remove project from hoop.

CAREFULLY cut away fabric from inside hole outline as closely to stitching as possible being careful not to cut stitching or stabilizer.

Flip hoop upside down, and closely cut bottom fabric carefully away inside hole outline, being careful not to cut stitching or stabilizer.

 Replace hoop on machine.

Stitch eighth color to reinfore.

Trim any fuzzies away from hole outline.

Stitch ninth color (hole satin stitching).

6.  Carefully trim fabric and pocket fabric layers closely to door knobbie outline being careful not to cut stitching or stabilizer.

Carefully trim bottom fabric layer under hoop closely to door knobbie outline being careful not to cut stitching or stabilizer.

Stitch 10th color to reinfore.

Trim any fuzzies around perimeter of outline.

Stitch final color (door knobbie perimeter satin stitching).

Remove from hoop.

Remove excess stabilizer.

You're finished!