The Artist Pocket Wraps are the second set in the Pocket Wraps series. Thank you to everyone who preordered this series!

Today's Pocket Wrap set was made with all the budding artists in mind!  The pocket wraps are perfectly sized to wrap around a box of markers or crayons.  Stuff an gift card to the local arts and crafts store inside or other fun art suplies!

Each Art Pocket Wrap is made completely in one hooping with no other sewing required.  It includes both a 4x4 version and a 5x7 version.

 $12.00

Complete instructions can be found at the bottom of this page.

Art Pocket Wrap (includes pes, jef and hus formats):

NOTE:  The 6" elastic will fit most standard movie candy sized boxes.  I used 5" for the box of crayons pocket wrap and 7" for the box of markers.  It can be lengthened or shortened though to accomodate any size box or other items.

1. Hoop one layer of stabilizer.

Stitch first color (pocket wrap fabric placement outline).

Cut 2 5x9" pieces of fabric and fold in half and press so they are 5x4.5".

Place one piece of folded fabric on top of wrap outline so folded edge is even with top horizontal straight stitching line.

Stitch second color to secure.

2. Stitch third color (elephant body fabric placement outline).

Place a piece of fabric on top of outline, covering completely.

Stitch fifth color to secure.

Trim fabric as closely as possible to lamb outline being careful not to cut stitching or fabric underneath.

Stitch sixth color (elephant outer satin stitching).

3.  Stitch seventh color (paint brush handle).

Stitch eighth color (paint brush hairs satin).

Stitch ninth color (elephant satin stitching).

Stitch tenth color (pallette).

Stitch 11 - 15 colors (pallette colors).

4.   Stitch 16th color (elastic placement outlines).

Cut a 6" piece of 1 inch wide elastic.

Place one end of elastic centered over left hand elastic placement outline so approximately 1/4" of elastic extends outside design and remainder of elastic is inside design.

Stitch 17th color to secure.

4/ Repeat with other end of elastic on right hand side.

Tape elastic securely down INSIDE design perimeters (it can be folded over itself in the center so it fits) so presser foot does not become entangled  in future steps.

Stitch 18th color to secure.

5.  Place second piece of folded fabric on top of design so folded edge is even with previously placed folded edge.

Stitch final color to secure.

Remove from hoop. Trim around perimeter of design leaving approximately 1/4" seam allowance.  Trim excess stabilizer from opening of pocket.

Turn right side out.  Slip over item and fill pocket.

You're finished!