Those naughty little monkeys just won't listen to mom!

Hopefully this fun Monkey's Bed Pocket Hanger will keep them all safe and sound!

Made from inexpensive felt, the Monkey's Bed Pocket Hanger is a fun way to store your monkey finger puppets!

For complete instructions, please scroll to the bottom of this page.

The Monkey's Bed Pocket Hanger Set Includes:

Monkey Bed pocket hanger with no button holes for the 5x7 hoop

Monkey Bed pocket hanger with button holes for the 5x7 hoop

$12.00

To purchase the Monkey's Bed Pocket Hanger ONLY (does not include finger puppets), please click on the paypal button for the format of your choice:

Monkey's Bed Pocket Hanger ONLY Pes:

Monkey's Bed Pocket Hanger ONLY Jef:

Monkey's Bed Pocket Hanger ONLY Hus:

*****************************

Monkey's Bed Pocket Hanger Instructions:

NEEDED:  felt squares, 1/2" buttons, a 7 1/2" length of ribbon, 

  1.  Hoop a layer of tearaway stablizer. 

2.  Cut a sheet of brown felt in half (the length of the felt so you have two long pieces) for bed.  Place one half on the hooped stabilizer and pin in place around the edges and place hoop on machine.  Do a trial layout to insure that the needle will not hit the pins.  (If you wish you can do a basting stitch instead of pinning or float this piece instead.)

3.  Sew the first two colors of the design (outline, buttonholes, pillows).     

4.  Lay the second sheet of the felt (blanket) on the design, placing the straight edge even with the bottom edges of the pillows.  Pin or float as in step 2.

5. Stitch the remaining steps of the design.

6.  Unhoop the design, carefully remove the stabilizer, and trim around the perimeter of the bed.

7.  The pocket is now complete!  If the pocket is to be the top pocket of your hanger, then sew a 7 1/2" piece of ribbon on the top two corners with buttons if desired.  Sew buttons to the bottom corners of the pocket.  

If the pocket is a lower pocket then open the buttonholes with a seam ripper or tiny scissors. 

8.  Make the desired number of pockets and button together and your hanger is complete!