The 18" Doll Pet Carrier Set is the third set in the 18" Doll ITH Series.

Thank you to everyone who preordered this series!

Sarah adores animals of every kind, so it only makes sense that her 18" friends need some pets of their own!

This set includes a pet carrier and three pets.  You will be amazed at how quickly these stitch out!  The Pet carrier is made entirely in one 4x4 hooping.  The window can be made from pet screen fabric or medium weight clear vinyl.  It is made in just 5 minutes stitching time with just 7 color stops!

The bunny is made entirely in one 4x4 hooping with no other hand stitching required.  It is made in just 6 minutes stitching time with just 6 color stops!

The poodle is made entirely in one 4x4 hooping with no other hand stitching required.  It is made in just 8 minutes stitching time with just 7 color stops!

The kitty is made entirely in one 4x4 hooping with no other hand stitching required.  It is made in just 6 minutes stitching time with just 6 color stops!

$15.00

 Complete instructions can be found at the bottom of this page. 

To purchase the 18" Doll PetCarrier Set, please click on the add to cart button.

18" Doll Pet Carrier Set (includes pes, jef & hus formats):

 18 In Doll Pet Carrier Instructions:

1. Hoop one layer of cutaway stabilizer.

Stitch first color (carrier fabric placement outline).

Cut 2 6x10" pieces of fabric and fold and press so they are 6x5".

Place one piece of folded fabric on top of design so folded edge is even with top straight horizontal line.

Stitch second color to secure.

2.  Cut a 10" piece of narrow ribbon (1/4-1/2").

Slip one end of ribbon between top of folded fabric edge and stabilizer on left side so approximately 1/2" is between the layers and the rest extends outside the fabric.  Tape in place.  Repeat with other end of ribbon on right side.

Stitch third color to secure.

3.  Stitch fourth color (window outline).

Carefully cut away fabric INSIDE window outline, being careful not to cut stabilizer underneath or stitching.

Place a piece of netting or clear vinyl on top of design, covering window opening completely.

Stitch fifth color to secure.

4. Remove hoop from machine but DO NOT remove design from hoop.  Carefully cut away stabilizer from INSIDE window outline.

Trim windown pet screen or vinyl as closely to outline as possible being careful not to cut stitching.

Stitch sixth color (window satin stitching).

5.  Place second piece of folded fabric on top of design so folded edge is even with previous folded edge and entire design is covered.

Stitch final color to secure.

6.  Remove from hoop.  Trim excess stabilizer from opening.  trim around perimeter of design leaving approximately 1/4" seam allowance and clipping curves well.  Turn right side out.

Insert pet.  You're finished!

 Bunny Instructions:

1. Hoop one layer of heavy duty water soluble stabilizer.  I used Badgemaster for best results.

Center a 5x5" piece of fabric on hooped stabilizer.

Stitch first color to secure.

2.  Stitch second color (eyes, mouth).

3. stitch third color (nose).

4.  Float a piece of 5x5" fleece under hooped design.

Float a second piece of 5x5" fabric UNDER fleece under hooped design, FACE DOWN.

Stitch fourth color to secure.

5.  Trim both fabric pieces and fleece piece as close to outline stitching as possible being careful not to cut stitching or stabilizer.

Stitch fifth color to stabilize.

Trim any fuzzies poking out.

Stitch sixth color (bunny satin stitching).

You're finished! 

Poodle Instructions:

1. Hoop one layer of heavy duty water soluble stabilizer.  I used Badgemaster for best results.

Center a 5x5" piece of fabric on hooped stabilizer.

Stitch first color to secure.

2.  Stitch second color (eyes).

3. stitch third color (nose).

4.  Stitch fourth color (satin stitching detailing).

5.  Float a piece of 5x5" fleece under hooped design.

Float a second piece of 5x5" fabric UNDER fleece under hooped design, FACE DOWN.

Stitch fifth color to secure.

6.  Trim both fabric pieces and fleece piece as close to outline stitching as possible being careful not to cut stitching or stabilizer.

Stitch sixth color to stabilize.

Trim any fuzzies poking out.

Stitch seventh color (poodle satin stitching).

You're finished! 

Kitty Instructions:

1. Hoop one layer of heavy duty water soluble stabilizer.  I used Badgemaster for best results.

Center a 5x5" piece of fabric on hooped stabilizer.

Stitch first color to secure.

2.  Stitch second color (eyes, mouth).

3. stitch third color (nose).

4.  Float a piece of 5x5" fleece under hooped design.

Float a second piece of 5x5" fabric UNDER fleece under hooped design, FACE DOWN.

Stitch fourth color to secure.

5.  Trim both fabric pieces and fleece piece as close to outline stitching as possible being careful not to cut stitching or stabilizer.

Stitch fifth color to stabilize.

Trim any fuzzies poking out.

Stitch sixth color (kitty satin stitching).

You're finished!