
The Doll Halloween Aprons were designed specifically to fit 18" dolls but will fit a wide variety of other dolls, also. These aprons are each made entirely in one hooping with just one small straight seam to be sewn closed by hand or topstitching upon completion.
The 18" Doll Halloween Apron set includes:
18" doll Frankie Apron for the 5x7 hoop
18" doll JackO'Lantern Apron for the 5x7 hoop
$12.00
Complete instructions can be found at the bottom of this page.
To purchase the 18" Doll Halloween Apron set, please click on the add to cart button.
18" Doll Halloween Apron set for the 5x7 hoop (Includes pes, jef & hus formats) :
JackO'Lantern Apron Instructions:
1. Hoop one layer of stabilizer.
Stitch first color (apron fabric placement outline).
Place a piece of fabric on top of apron outline, covering completely.
2. Stitch second color to secure.
3. Stitch third color (facial features).
4. Stitch fourth color (top apron ribbon ties placement lines).
Place one 8inch 3/8" - 5/8" ribbon on top of left ribbon line approximately 1/4" from left edge of design with 1/2" of ribbon extending above top of design.
Tape in place. Stitch fifth color to secure.
Place one 8inch 3/8" - 5/8" ribbon on top of right ribbon line approximately 1/4" from left edge of design with 1/2" of ribbon extending above top of design.
Tape in place. Stitch sixth color to secure.
5. Stitch seventh color (side ribbon ties placement lines).
Place one 8inch 3/8" - 5/8" ribbon on top of left ribbon line approximately 1/4" from armhole edge of design with 1/2" of ribbon extending out side of design.
Stitch eighth color to secure.
Place one 8inch 3/8" - 5/8" ribbon on top of right ribbon line approximately 1/4" from armhole edge of design with 1/2" of ribbon extending out side of design.
Stitch ninth color to secure.
Fold and tape ribbons so they are inside of design.
7. Place a second piece of fabric on top of design FACE DOWN, covering entire design completely.
Stitch final color to secure.
9. Remove from hoop. Trim around perimeter of design leaving approximately 1/4" seam allowance and clipping curves and corners well.
Turn right side out. Press and stitch small opening seam shut.
You're finished!
Frankie Apron Instructions:
1. Hoop one layer of stabilizer.
Stitch first color (apron fabric placement outline).
Place a piece of fabric on top of apron outline, covering completely.
2. Stitch second color to secure.
3. Stitch third color (hair fabric placement outline).
Cover outline completely with a piece of fabric.
Stitch fourth color to secure.
Trim fabric as closely to outline as possible being careful not to cut stitching or fabric underneath.
Stitch fifth color (hair satin stitching and facial features).
Stitch sixth color (nose).
4. Stitch seventh color (top apron ribbon ties placement lines).
Place one 8inch 3/8" - 5/8" ribbon on top of left ribbon line approximately 1/4" from left edge of design with 1/2" of ribbon extending above top of design.
Tape in place. Stitch eighth color to secure.
Place one 8inch 3/8" - 5/8" ribbon on top of right ribbon line approximately 1/4" from left edge of design with 1/2" of ribbon extending above top of design.
Tape in place. Stitch ninth color to secure.
5. Stitch tenth color (side ribbon ties placement lines).
Place one 8inch 3/8" - 5/8" ribbon on top of left ribbon line approximately 1/4" from armhole edge of design with 1/2" of ribbon extending out side of design.
Stitch eleventh color to secure.
Place one 8inch 3/8" - 5/8" ribbon on top of right ribbon line approximately 1/4" from armhole edge of design with 1/2" of ribbon extending out side of design.
Stitch 12th color to secure.
Fold and tape ribbons so they are inside of design.
7. Place a second piece of fabric on top of design FACE DOWN, covering entire design completely.
Stitch final color to secure.
9. Remove from hoop. Trim around perimeter of design leaving approximately 1/4" seam allowance and clipping curves and corners well.
Turn right side out. Press and stitch small opening seam shut.
You're finished!